ASCERTAINMENT OF THE EQUIVALENT CIRCUIT PARAMETERS OF THE ASYNCHRONOUS MACHINE

The article considers experimental and analytical determination of the asynchronous machine equivalent-circuit parameters with application of the reference data. Transient processes investigation of the asynchronous machines necessitates the equivalent circuit parameters (resistance impedance, inductances and coefficient of the stator-rotor contours mutual inductance) that help form the transitory-process mathematical simulation model. The reference books do not provide those parameters; they instead give the rated ones (active power, voltage, slide, coefficient of performance and capacity coefficient) as well as the ratio of starting and nominal currents and torques. The noted studies on the asynchronous machine equivalent-circuits parametrization fail to solve the problems ad finem or solve them with admissions. The paper presents experimental and analytical determinations of the asynchronous machine equivalent-circuit parameters: the experimental one based on the results of two measurements and the analytical one where the problem boils down to solving a system of nonlineal algebraic equations. The authors investigate the equivalent asynchronous machine input-resistance properties and adduce the dependence curvatures of the input-resistances on the slide. They present a symbolic model for analytical parameterization of the asynchronous machine equivalent-circuit that represents a system of nonlineal equations and requires one of the rotor-parameters arbitrary assignment. The article demonstrates that for the asynchronous machine equivalent-circuit experimental parameterization the measures are to be conducted of the stator-circuit voltage, current and active power with two different slides and arbitrary assignment of one of the rotor parameters. The paper substantiates the fact that additional measurement does not discard the rotor-parameter choice arbitrariness. The authors establish that in motoring mode there is a critical slide by which the stator current value turns out to be the minimum. 

1. Ivanov-Smolenskiy ?. V. (2006) Electric Machines. Vol. 2. Moscow: Publisher of the Moscow Power Engineering University. 531 p. (in Russian).

2. Kovach K. P., & Rats I. (1963) Transient Phenomena in the Alternating Current Electric Machines. Leningrad, Gosenergoizdat. 744 p. (in Russian).

3. Kopylov I. P. (2001) Mathematic Modeling of the Electric Machines. Moscow, Vysshaia Shkola. 327 p. (in Russian).

4. Safaryan V. S., & Gevorgyan S. G. (2013) Analysis of the Autonomous Asynchronous Generator Regimes with Account of the Prime-Mover Characteristics. Vestnik Gosudarstvennogo inzhenernogo universiteta Armenii. Ser. Energetika, Elektrotekhnika [Bulletin of the State Engineering University of Armenia. Ser. Energy Industry, Electrotechnics], 16 (1), 91–100 (in Russian).

5. Zagorskiy ?. Ye., & Shakaryan Yu. G. (1986) Transient Processes Control in the Alternating-Current Electric Machines. Moscow, Energoatomizdat. 176 p. (in Russian).

6. Kravchik ?. E., Shlaf M. M., Afonin V. I., & Sobolenskaia, E. A. (1982) Asynchronous Motors of 4? Series. Moscow, Energoizdat. 504 p. (in Russian).

7. Goldberg ?. D., Gurin Ya. S., & Sviridenko I. S. (2001) Designing Electric Machines. Moscow, Vysshaia shkola. 312 p. (in Russian).

8. Garmash V. S. (2009) Ascertainment of the Asynchronous Motors Equivalent-Circuit Parameters from the Dynamic Regimes. Nauchnye Trudy Donetskogo Natsional'nogo Tekhnicheskogo Universiteta [Scientific studies of the Donetsk National Technical University], 9, 48–51. (in Russian).

9. Kalinov A. P., Reznik D. V., Rodskin D. I., & Romashikhin Iu. V. (2006) Ascertainment of the Asynchronous Motor Electromagnetic Parameters at Low Frequency Voltage Power Supply. Vestnik Kremenchugskogo Gosudarstvennogo Politekhnicheskogo Universiteta. Ser. Diagnostika v Elektromekhanicheskikh i Energeticheskikh Sistemakh [Bulletin of the Kremenchug State Polytechnic University. Ser. Diagnostics in Electromechanical and Energy Systems], 4 (1), 117–121 (in Russian).

10. Beshta ?. S., & Semin ?. ?. (2014) Ascertainment of the Asynchronous Motors Equivalent-Circuit Parameters at Dissymmetric Power Supply of the Stator. Elektromekhanicheskie i Energosberegaiushchie Sistemy [Elecrtomecanical and Energy Saving Systems], 2, 10–16 (in Russian).

11. Moschinskiy Yu. ?., Bespalov V. Ya., & Kiryakin ?. ?. (1998) Determining the Asynchronous Motor Equivalent Circuit from the Catalogue Data. Elektrichestvo [Electricity], 4, 38–42 (in Russian).