INVARIANT SYSTEM OF THE STEAM-DRUM BOILER FEED AUTOMATIC REGULATION
Abstract
The choice of the controlling system structure, law of control, and optimal parameters for the regulator dynamic settings exercise, under principal influences, substantial effect on quality of the transient processes of water-level change in the shell of the boiler. At the present moment, techniques of design by analysis for the optimal regulating systems allow improving quality of the transient processes. Applying the method of structural-parametrical optimization and the invariance theory render it possible to significantly improve quality of the boiler-shell water level maintaining by means of changing the system structure and optimizing the feed automatic-control system dynamic settings. However, this becomes attainable at the expense of increasing the control-action maximum magnitude with the feeding water rate. At the same time, the indicator of the latter should be less than the control-action value of the typical threeelement control of the feed-regulation system as this directly links to the boiler equipment safety, the drum metal and the feed-water economizer longevity. For removal of this shortcoming, the paper proposes to form in parallel to the real inertial region of the controlled member its dynamic simulation which allows separating the equivalent external disturbance without having to measure it. And to limit the compensation device output to the control-action value of the typical three-element control system of the automatic feed-regulation. This leads to the maximum control-action magnitude decrease, besides, the external-disturbances execution time remains unchanged. Altogether, under all the influences, the authors report of receiving substantial improvement of regulation quality as compared with the typical three-element automatic feed-regulation system
About the Authors
G. T. Kulakov
Belarusian National Technical University
Belarus
Belarus
Professor, PhD in Engineering
A. N. Kukhorenko
Institute for Command Engineers of the Ministry for Emergency Situations of the Republic of Belarus
Belarus
Graduate student
Belarus
Graduate student
References
1. Pletnev, G. P. (2007). Automation of Technological Processes and Production in the Heat-Power Engineering. 4th pub.Moscow, MEI Publishing house. 352 p. (in Russian).
2. Demchenko, V. ?. (2001). Automation and Simulation of the NPP and TPP Technological Processes. Odessa, Astroprint. 308 p. (in Russian).
3. Klyuev, ?. S., Lebedev, ?. ?., Novikov, S. I. (1985). Adjusting Automated Control Systems of the Steam Drum-Boilers. Moscow, Energoatomizdat. 280 p. (in Russian).
4. Deyanov, ?. ?. (1963). Automation, Protection and Signaling at the Electric Power Plants. Moscow, Leningrad, Gosenergoizdat. 384 p. (in Russian).
5. Kulakov, G. ?., Kulakov, A. T., Kukhoryenko, ?. N. (2014). Mathematical Simulation of the Transient Processes in Three-Element Automatic Control System for the Steam Generator Water Feed to Load Tripping. Izvestyia vysshikh uchebnykh zavedenii i energeticheskikh ob"edinenii SNG - Energetika [Proceedings of CIS Higher Education Institutions and Power Engineering Associations – Energetika], 1, 57–64 (in Russian).
6. Kulakov, G. ?., Kukhoryenko, ?. N. (2014). Optimizing Transient Processes of Water-Level Changes in the Drums of Steam Boilers. Izvestyia vysshikh uchebnykh zavedenii i energeticheskikh ob"edinenii SNG - Energetika [Proceedings of CIS Higher Education Institutions and Power Engineering Associations – Energetika], 4, 63–74 (in Russian).
7. Gurevich, E. Z. (1974). The State, Development Prospects and Technical-and-Economic Assessment of Feeding Automation of the Drum-Type Steam Generators. Minsk. 60 p. (in Russian).
8. Shirokiy, D. K., Kurilenko, ?. D. (1972). Parameters Computation of the Industrial Regulating Systems. Reference aid. Kiev, Tekhshka. 232 p. (in Russian).
9. Frer, F., Orttenburger, F. (1973). Introduction to Electronic Control Engineering. Moscow, Energy. 193 p. (in Russian).
10. Gurevich, E. Z., Khutskii, G. I. (1968). Three-pulse power regulator. Inventor’s Certificate of the USSR No 230832 (in Russian).
11. Kulakov, G. ?., Kulakov, A. T., Korzun, M. L., Basalai, D. V. (2012). Structural Parametric Optimization of the Automatic Control Systems with Differentiating the Intermediate Signal. Izvestyia vysshikh uchebnykh zavedenii i energeticheskikh ob"edinenii SNG - Energetika [Proceedings of CIS Higher Education Institutions and Power Engineering Associations – Energetika], 3, 64–71 (in Russian).
12. Kulakov, G. ?. (2003). Analysis and Synthesis of the Automatic Control Systems: educational aid. Minsk, Technoprint. 136 p. (in Russian).
Review
For citations:
Kulakov G.T., Kukhorenko A.N. INVARIANT SYSTEM OF THE STEAM-DRUM BOILER FEED AUTOMATIC REGULATION. ENERGETIKA. Proceedings of CIS higher education institutions and power engineering associations. 2015;(5):59-68. (In Russ.)
Views:
1882
Email this article 