STRESS AND STRAIN STATE OF REPAIRING SECTION OF PIPELINE
Abstract
Reliability of continuous operation of pipelines is an actual problem. For this reason should be developed an effective warning system of the main pipelines‘ failures and accidents not only in design and operation but also in selected repair. Changing of linear, unloaded by bending position leads to the change of stress and strain state of pipelines. And besides this, the stress and strain state should be determined and controlled in the process of carrying out the repair works. The article presents mathematical model of pipeline’s section straining in viscoelastic setting taking into account soils creep and high-speed stress state of pipeline with the purpose of stresses evaluation and load-supporting capacity of repairing section of pipeline, depending on time. Stress and strain state analysis of pipeline includes longitudinal and circular stresses calculation with account of axis-asymmetrical straining and was fulfilled on the base of momentless theory of shells. To prove the consistency of data there were compared the calcu- lation results and the solution results by analytical methods for different cases (long pipeline’s section strain only under influence of cross-axis action; long pipeline’s section strain under in- fluence of longitudinal stress; long pipeline’s section strain; which is on the elastic foundation, under influence of cross-axis action). Comparison results shows that the calculation error is not more than 3 %.
Analysis of stress-strain state change of pipeline’s section was carried out with development of this model, which indicates the enlargement of span deflection in comparison with problem’s solution in elastic approach. It is also proved, that for consistent assessment of pipeline maintenance conditions, it is necessary to consider the areolas of rheological processes of soils. On the base of complex analysis of pipelines there were determined stresses and time-deflection relation for two types of soils with different rheological properties.
References
1. Yakubovskiy, Yu. E., Maliush?n, H. A., Iakubovs'ka, C. B., Platonov, O. M. (2003) Problems of Pipeline Transport. Saint Petersburg, Nedra. 200 p. (in Ukrainian).
2. Grudz, V. Ya., Tymkiv, D. F., Mykhalkiv, V. B., Kostiv, V. V. (2009) Maintenance and Repair of Pipelines. Ivano-Frantsisk, Lileya-NV, 553–555 (in Ukrainian).
3. Maiorov, V. V. (2013) Efficiency Increasing of Operation Reliability of Main Pipelines OJC “Beltransgas”. Izvestiia Vysshikh Uchebnykh Zavedenii i Energeticheskikh Ob’Edinenii – Energetika [Proceedings of the Higher Education Institutions and Power Engineering Associa- tions – Power Engineering], 5, 76–81 (in Russian).
4. Galkin, V. O. (2011) Analysis of Mathematical Models. Moscow, Binom. Laboratory of Knowledge, 82–86 (in Ukrainian).
5. Muskhelishvili, N. I. (1966) Some Significant Problems of Mathematical Theory of Elasticity. Moscow, Nauka. 707 p. (in Russian).
6. Muskhelishvili, N. I. (1968) Singular Integral Equation. Moscow, Nauka. 511 p. (in Russian).
7. GBN B.3.1-00013741–12:2011 Magistral'ni Gazoprovodi. Remont Dugovim Zvariu- vanniam v Umovakh Ekspluatatsii [Natsionalny Standard Ukrainy. HBN B.3.1-00013741–12:2011. The Main Gas Pipelines. Repair by Arc Welding Under Operation Conditions]. Kiev: Minregionbud Ukraine, 2011, 40–48 (in Ukrainian).
8. SNiP 2.05.06-85. Stroitel’nye Normy i Pravila. Magistral’nye Truboprovody [SNiP 2.05.06–85. Building Regulations. The Main Pipelines]. Moscow: TSITP SSSR State Construction Committee,52 p. (in Russian).
9. Makhnenko, V. I., But, V. S., Oleinik, O. I. (2009) Repair of the Main Pipelines in Operation by Welding. Problemy Prochnosti [Strength Problems], 5, 86–100 (in Russian).
10. But, V. S., Oleinik, O. I. (2007) The Main Directions of Repair Technologies Deve- lopment of the Main Pipelines under Stress. Avtomaticheskaia Svarka [Automatic Welding], 5, 42–50 (in Russian).
Review
For citations:
Nikolaev V.V. STRESS AND STRAIN STATE OF REPAIRING SECTION OF PIPELINE. ENERGETIKA. Proceedings of CIS higher education institutions and power engineering associations. 2015;(1):82-92. (In Russ.)
Views:
882
Email this article 