Parametric Optimization of Biomass Steam-and-Gas Plant
Abstract
The paper contains a parametric analysis of the simplest scheme of a steam-and gas plant for the conditions required for biomass burning. It has been shown that application of gas-turbine and steam-and-gas plants can significantly exceed an efficiency of steam-power supply units which are used at the present moment. Optimum thermo-dynamical conditions for application of steam-and gas plants with the purpose to burn biomass require new technological solutions in the field of heat-exchange equipment designs.
About the Authors
V. SedninBelarus
A. Levshenia
Belarus
References
1. Комбинированная энергетическая установка на биомассе / В. А. Седнин [и др.] // Энергия и Менеджмент. – 2011. – № 5. – С. 14–17.
2. Обзор состояния развития технологий комбинированного производства электрической и тепловой энергии на биомассе / В. А. Седнин [и др.] // Энергия и Менеджмент. – 2012. – № 3. – С. 12–17.
3. Yiping, D. Parametric optimization and comparative study of organic Rankine cycle (ORC) for low grade waste heat recovery / D. Yiping, W. Jiangfeng, G. Lin // Energy Conversion and Management. – 2009. – Vol. 50. – P. 576–582.
4. Thermodynamic analysis of externally fired gas turbine combined cycle integrated with biomass gasification plant / S. Soltani [et al.] // Energy Conversion and Management. – 2013. – Vol. 70. – P. 107–115.
5. Iora, P. Innovative combined heat and power system based on a double shaft intercooled externally fired gas cycle / P. Iora, P. Siva // Applied Energy. – 2013. – Vol. 105. – P. 108–115.
6. Working fluid compositions for use in semi-closed Brayton cycle gas turbine power systems: рatent №: US 6,824,710 B2 / F. Viteri, R. E. Anderson. – Nov. 30, 2004.
7. Попырин, Л. С. Моделирование и оптимизация теплоэнергетических установок / Л. С. Попырин. – М.: Энергия, 1978. – 342 с.
Review
For citations:
Sednin V., Levshenia A. Parametric Optimization of Biomass Steam-and-Gas Plant. ENERGETIKA. Proceedings of CIS higher education institutions and power engineering associations. 2013;(6):72–79. (In Russ.)