Tractional Electric Drive with Non-Sensing Element Vector Control System
Abstract
The purpose of the paper is a structure formation and an analysis of non-sensing element vector control system developed for tractional electric drive with the help of mathematical simulation method. The paper presents a functional diagram of the electric drive with non-sensing element vector control system operated by an asynchronous short-circuited electric motor. Main expressions used for evaluation of variables of system conditions and parameters are cited in the paper. The paper provides results of mathematical simulation method for electric drive system taking into consideration various parameter values which confirm serviceability of the developed control system within the whole range of possible parameter chnges.
About the Authors
O. F. OpeykoBelarus
A. I. Ptashnik
Belarus
V. I. Khilmon
Belarus
References
1. Blaschke, F. Das Verfahren der Feldorientierung zur Regelung der Asynchronmaschine / F. Blaschke // Siemens-Forsch und Entwicklungsber. – 1972. – Nо. 1. – S. 184–193.
2.
3. Системы подчиненного регулирования электроприводов переменного тока с вентильными преобразователями / О. В. Слежановский [и др.]. – М. : Энергоатомиздат, 1983. –256 с.
4.
5. Фираго, Б. И. Учебно-методическое пособие к курсовому проектированию по теории электропривода / Б. И. Фираго. – Минск : БНТУ, 2005. – 126 с.
6.
7. Фираго, Б. И. Теория электропривода : учеб. пособие / Б. И. Фираго, Л. Б. Павлячик. – Минск : Техноперспектива, 2004. – 527 с.
8.
9. Фираго, Б. И. Регулируемые электроприводы переменного тока / Б. И. Фираго, Л. Б. Павлячик. – Минск : Техноперспектива, 2006. – 363 с.
10.
11. Stephan, J. Real Time Estimation of the Parameters and Flux of Induction Motors / J. Stephan, M. Bodson, J. Chiasson // IEEE Trans. On Industry Applications. Vol. IA-30, 1994. – No. 3. – Р. 745–759.
12.
13. Elbuluk, M. Design and Implementation of a Closed-Loop Observer and Adaptive Controller for Induction Motor Drives / M. Elbuluk, N. Langovsky, M. D. Kankam // IEEE Trans. On Industry Applications. – 1998. – Vol. IA-34, No. 3. – Р. 435–442.
14.
15. Marino, R. Global Adaptive Output Feedback Control of Induction Motors with Uncertain Rotor Resistance / R. Marino, S. Peresada, P. Tomei // IEEE Trans. On Automatical Control. – 1999. – Vol. AC-44, Nо. 5. – Р. 745–759.
16.
17. A Nonlinear Least-Squares Approach for Identification of the Induction Motor
18. Parameters / J. Kaiyu Wang [et al.] // IEEE Trans. On Autom. Control. – 2005. – Vol. AC-50,
19. No. 10. – Р. 1622–1628.
20.
21. Sensorless Control with Kalman Filter on TMS320 Fixed-Point DSP. Literatur Number: BPRA057, Texas Instruments Europe July 1997.
22.
23. Иньков, Ю. М. Системы управления для электроприводов с асинхронными тяговыми двигателями / Ю. М. Иньков, Г. А. Федяева, В. П. Феоктистов // Электротехника. –2009. – № 4. – С. 8–12.
24.
25. Панкратов, В. В. Синтез адаптивных алгоритмов вычисления скорости асинхронного электропривода на основе второго метода Ляпунова / В. В. Панкратов, Д. А. Котин // Электричество. – 2007. – № 8. – С. 48–53.
26.
27. Виноградов, А. Бездатчиковый электропривод подъемно-транспортных механизмов / А. Виноградов, А. Сибирцев, С. Журавлев // Силовая электроника. – 2007. – № 1. – С. 46–52.
28.
29. Волков, А. В. Идентификация потокосцепления ротора и скорости асинхронного двигателя с учетом изменений его активных сопротивлений / А. В. Волков, Ю. С. Скалько // Электротехника. – 2009. – № 11. – С. 2–12.
30.
31. A Review of RFO Induction Motor Parameter Estimation Techniques / A. Hamid [et al.] // IEEE Trans. On Energy Conversion. – 2003. – Vol. 18, Nо. 2. – Р. 271–283.
32.
33. Фомин, В. Н Адаптивное управление динамическими системами / В. Н. Фомин, А. Л. Фрадков, В. А. Якубович. – М. : Наука, 1981.
34.
35. Фрадков, А. Л. Адаптивное управление в сложных системах / А. Л. Фрадков. – М. : Наука, 1990.
Review
For citations:
Opeyko O.F., Ptashnik A.I., Khilmon V.I. Tractional Electric Drive with Non-Sensing Element Vector Control System. ENERGETIKA. Proceedings of CIS higher education institutions and power engineering associations. 2010;(6):37-43. (In Russ.)