Improving the Reliability of DC-DC Power Supply by Reserving Feedback Signals

The paper deals with the problem of improving the reliability of DC-DC power supplies with pulse-width modulation. The topicality of the work is related to the importance of power supply issues in modern electronics, since the quality of operation of consumer electrical appliances, including critical ones, directly depends on the serviceability of sources. The object of the study is feedback circuits aimed at stabilization of the parameters of power supply of consumers. Failures of the mentioned feedback circuits most often occurs due to the electronic components degradation under harsh operating conditions as well as under severe mechanical overloads. Such failures are dangerous for uncontrolled increase of power supply output voltage and output current. To avoid this, a new method of reserving voltage feedback signals is presented in the paper which is implemented on the basis of flyback supply topology. Feedback signals are formed from the optocoupler located on the load side and from the auxiliary winding of the power transformer, together forming two independent output voltage control circuits. Only one circuit performs stabilization at any given moment of time. If one of these circuits fails, the second one can simply replace it in its operation. The proposed method does not require any digital signal processing algorithms or microprocessor control modules and can be implemented on the basis of cheap, widely available analog chips that perform pulse-width control of the output voltage. As a result, the problem of sudden feedback loop failure is solved and the reliability of electrical equipment is increased. The validity of the proposed method is confirmed by the results of computer simulation with the use of MatLab-Simulink environment. The obtained results can be used in design of fault-tolerant secondary power supplies that operate in harsh operating conditions.

1. Abramovich B. N. (2018) Uninterrupted Power Supply System for Mining Industry Enterprises. Zapiski Gornogo Instituta = Journal of Mining Institute, 229, 31–40 (in Russian). https://doi.org/10.25515/PMI.2018.1.31

2. Bogdanov I. A., Veprikov A. A., Kasyanova A. N., Morenov V. A. (2017) Increase of Energy Efficiency of Electrotechnical Complexes of Cogeneration Plants for Power Supply of Objects of Oil and Gas Enterprises. Mezhdunarodnyi nauchno-issledovatel'skii zhurnal = International Research Journal,66 (12), 59–63 (in Russian). https://doi.org/10.23670/IRJ.2017.66.144

3. Aliakseyeu Yu. G., Korolyov A. Yu., Niss V. S., Parshuto A. E., Soroka E. V., Budnitskiy A. S. (2018) Power Supply for the Investigation of Pulse Electrochemical Processes. Enеrgеtika. Izvestiya Vysshikh Uchebnykh Zavedenii i Energeticheskikh Ob’edinenii SNG = Energetika. Proceedings of CIS Higher Education Institutions and Power Engineering Associations, 61 (3), 246–257 (in Russian). https://doi.org/10.21122/1029-7448-2019-61-3-246-257

4. Bazhin V. Y., Petrov P. A. (2011). Diagnostics of Technological Process of Powerful Aluminium Pots by Means of Special Programs. Zapiski Gornogo Instituta = Journal of Mining Institute, 192, 140–144 (in Russian).

5. Zhezhelenko I. V. (2018) The Main Directions of Improving the Efficiency of Production, Transmission and Distribution of Electrical Energy. Enеrgеtika. Izvestiya Vysshikh Uchebnykh Zavedenii i Energeticheskikh Ob’edinenii SNG = Energetika. Proceedings of CIS Higher Education Institutions and Power Engineering Associations, 61 (1), 28–35 (in Russian). https://doi.org/10.21122/1029-7448-2018-61-1-28-35

6. Hwu K. I., Shieh J. (2017) Applying Module-Link Method to Multiple Power Supplies Paralleled. IEEE IECON 2017 – 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, 901–903. https://doi.org/10.1109/iecon.2017.8216155

7. Cheng P., Ding G., Song C., Chai H., Xu G. (2019) Stability Analysis of Identical Paralleled DC-DC Converters with Average Current Sharing. 2019 IEEE Asia Power and Energy Engineering Conference (APEEC), Chengdu, 60–64. https://doi.org/10.1109/apeec.2019.8720726

8. Meng L., Dragicevic T., Guerrero J., Vasquez J. (2013) Stability Constrained Efficiency Optimization for Droop Controlled DC-DC Conversion System. IECON 2013 – 39th Annual Conference of the IEEE Industrial Electronics Society, Vienna, 7222–7227. https://doi.org/10.1109/iecon.2013.6700333

9. Sun B., Bower I. (2018) How to Parallel Two DC/DC Converters with Digital Controllers. Analog Design Journal, (3Q), 1–5.

10. You J., Vilathgamuwa M., Ghasemi N. (2018) Loop-Sharing Method Based Current Sharing Controller Design for Parallel DC/DC Converters. IET Power Electronics, 12 (11), 1937–1945. https://doi.org/10.1049/iet-pel.2017.0146

11. Texas Instruments Inc. (2018) Datasheet. TPS2475x 12-A eFuse Circuit Protector with Current Monitor TPS24750, TPS24751. Available at: https://www.ti.com/lit/ds/symlink/tps24751.pdf

12. Ridley R. (2014) Results of a Power Supply Failure Survey. Power Systems Design. Available at: https://www.powersystemsdesign.com/articles/results-of-a-power-supply-failure-urvey/34/6539

13. Panov Y., Jovanovic M. (2005) Small-Signal Analysis and Control Design of Isolated Power Supplies with Optocoupler Feedback. IEEE Transactions on Power Electronics, 20 (4), 823–832. https://doi.org/10.1109/tpel.2005.850926

14. El-Hageen H. (2019) Modeling the Performance Characteristics of Optocoupler under Irradiated Fields. Multiscale and Multidisciplinary Modeling, Experiments and Design, 8 (3), 33–39. https://doi.org/10.1007/s41939-019-00058-x

15. Zhang T., Xu M., Qian Q., Sun W., Lu S. (2016) Oscillation Effect of Auxiliary Winding in Primary Side Regulated Flyback Converter. IEEJ Transactions on Electrical and Electronic Engineering, 11 (5), 640–647. https://doi.org/10.1002/tee.22282

16. Savin M., Abramov S. (2019) Calculation and Design of a Planar Transformer for a Reverse-Flow Converter. Elektronika: nauka, tekhnologiya, biznes = Electronics: Science, Technology, Business, (8), 40–44 (in Russian).