Orthogonal Components Forming of the Microprocessor-Based Protection Input Signals

The use of orthogonal components (OS) is the main direction of determining information parameters in microprocessor relay protection and automation of electric power systems. Most of the measuring devices used in modern protection and automation devices can be implemented using known operating systems. Digital non-recursive frequency filters based on discrete Fourier transform are used for OS selection. The main disadvantage of these filters is their low performance that exceeds the period of industrial frequency. For the construction of high-speed measuring devices, this time of establishing the true output signal is often unacceptable. The article proposes to form the equivalent signal OS in microprocessor defenses based on the values of the cosine and sine axes of the main harmonic formed using a discrete Fourier transform, by multiplying them by a correction factor, which is a function of the values of the input signal amplitude and its main harmonic. The proposed algorithm for generating OS input signals in microprocessor defenses is characterized by high performance in transient modes and has wide functionality. A block diagram of an OS equivalent signal generator has been developed, all blocks of which can be implemented according to known schemes on a microelectronic and microprocessor element base. The OS shaper model is implemented in the MatLab-Simulink dynamic modeling environment. The model functioning was checked using two types of test actions, viz. a sinusoidal signal with a frequency of 50 Hz (idealized action) and a signal close to the real secondary current of a short-circuit current transformer. As a result of the performed calculations, a significant (up to two times) in the speed of the proposed method of OS formation in comparison with the formers based on the discrete Fourier transform, frequency properties of both formers being identical.

1. Shneerson E. M. (2007) Digital Relay Protection. Moscow, Energoatomizdat Publ. 549 (in Russian).

2. Romaniuk F. A., Rumjansev V. Yu., Romaniuk K. F. (2012) Principles of Fulfillment of Flexible Formers of Orthogonal Input Value Components in Micro-Processing Protection of Power Plants. Energetika. Izvestiya Vysshikh Uchebnykh Zavedenii i Energeticheskikh Ob’edinenii SNG = Energetika. Proceedings of the CIS Higher Education Institutions and Power Engineering Associations, (6), 5–10 (in Russisn). https://doi.org/10.21122/1029-7448-2012-0-6-76-82.

3. Rumiantsev Yu. V., Romaniuk F. A., Rumiantsev V. Yu., Novash I. V. (2016) Digital Filters Implementation in Microprocessor-Based Relay Protection. Energetika. Izvestiya Vysshikh Uchebnykh Zavedenii i Energeticheskikh Ob’edinenii SNG = Energetika. Proceedings of the CIS Higher Education Institutions and Power Engineering Associations, 59 (5), 397–417 (in Russian). https://doi.org/10.21122/1029-7448-2016-59-5-397-417.

4. Romaniuk F. A., Loman М. S., Kachenya V. S. (2019) Methods of Forming Orthogonal Components of Input Signals for Relay Protection. Energetika. Izvestiya Vysshikh Uchebnykh Zavedenii i Energeticheskikh Ob’edinenii SNG = Energetika. Proceedings of the CIS Higher Education Institutions and Power Engineering Associations, 62 (1), 5–14 (in Russian). https://doi.org/10.21122/1029-7448-2019-62-1-5-14.

5. Romaniuk F. A., Rumiantsev V. Yu., Novash I. A., Rumiantsev Yu. V. (2019) Technique of Performance Improvement of the Microprocessor-Based Protection Measuring Element. Energetika. Izvestiya Vysshikh Uchebnykh Zavedenii i Energeticheskikh Ob’edinenii SNG = Energetika. Proceedings of the CIS Higher Education Institutions and Power Engineering Associations, 62 (5), 403–412 (in Russian). https://doi.org/10.21122/1029-7448-2019-62-5-403-412.

6. Schweitzer E. O., Hou D. (1993) Filtering for Protective Relays. WESCA-NEX 93. Communications, Computers and Power in the Modern Enviroment. Conference Proceedings. IEEE, 15–23. https://doi.org/10.1109/wescan.1993.270548.

7. SimPowerSystems. User’s Guide. The MathWorks, Inc. 2011.

8. Chernykh I. V. (2008) Modeling of Electrical Devices in MatLab, SimPowerSystems and Simulink. Moscow, DMK Press; St.-Petersburg, Piter. 288 (in Russian).

9. Romaniuk F. A., Kachenya V. S., Kierczynski K. (2018) Digital Filters of Seperate the First and Second Harmonics of Signals in Microprocessor-Bases Protection of Electrical Installations Equipped with Transformers. Przegląd Electrotechniczny, 1 (7), 48–51. https://doi.org/10.15199/48.2018.07.11.

10. Rumiantsev Yu. V., Romaniuk F. A., Rumiantsev V. Yu., Novash I. V. (2018) Digital Current Measurement Element for Operation During Current Transformer Severe Saturation. Energetika. Izvestiya Vysshikh Uchebnykh Zavedenii i Energeticheskikh Ob’edinenii SNG = Energetika. Proceedings of the CIS Higher Education Institutions and Power Engineering Associations, 61 (6), 483–493 (in Russian). https://doi.org/10.21122/1029-7448-2018-61-6-483-493.

11. Romaniuk F. A., Rumiantsev V. Yu., Rumiantsev Yu. V., Dziaruhina A. A. (2020) Reducing the Impact of the Frequency Change on the Formation of Orthogonal Components of the Relay Protection Input Signals. Energetika. Izvestiya Vysshikh Uchebnykh Zavedenii i Energeticheskikh Ob’edinenii SNG = Energetika. Proceedings of the CIS Higher Education Institutions and Power Engineering Associations, 63 (1), 42–54 (in Russian). https://doi.org/10.21122/1029-7448-2020-63-1-42-54.