Analysis of the Efficiency of Composite Supports in Electric Networks of the Republic of Belarus

Modern conditions for the development of the electric power industry increase the requirements in the field of technical conditions and reliability; thus, in a number of Western countries electric networks are being restructured on the basis of safe, environmentally friendly and reliable composite supports. The article analyzes the structure, design and methods of construction of overhead power lines with composite supports that are more promising than traditional ones. The properties, main characteristics and advantages of materials for the production supports of fiberglass and of wood are considered. The advantages and disadvantages of composite and wooden racks are compared and it is shown that most of the requirements for the supports of overhead power lines are met by composite supports. It is discovered that the existing and promising solutions that enable effective use of composite supports in the construction of an overhead line are quite diverse. Currently, in the electrical networks of Western countries, the most common structural model of the construction of an overhead line is the one the one that alternates composite and wooden supports in a certain sequence. The best option of the use of composite supports along with wood ones is the following ratio: four composite supports to one wooden one (method of construction “4/1”). The advantages of this method of construction of the power line are presented, viz. a significant increase in the mechanical strength of the structure of supports and wires as well as the safety of their maintenance. The results of technical and economic calculation that confirm the advantage of constructing a 10 kV distribution line according to the “4/1” scheme are presented. The implementation of composite supports in the electric networks of the Republic of Belarus in the long term will allow obtaining a tangible financial effect by reducing the cost of operation of the overhead line and because of a significant period of operation of composite racks, which is an undoubted advantage in conditions of the modern market economy. 

1. Koltarp S., Waid T. (2015) Standing Tall Against the Weather. Severe Weather Justifies the Decision of the Network Company to Install Fiberglass Poles. Vozdushnye liniii [Overhead Lines], (1), 60–64 (in Russian).

2. Preobrazhenskii A. N. (2010) Fiberglass: Properties, Applications, Technologies. Glavnyi mekhanik = Chief Mechanical Engineer, (5), 27–36 (in Russian).

3. Bokov G. S., Zhulev A. N. (2012) Distribution Electrical Networks. Optimization of Technological and Technical Conditions of Development. Novosti elektrotekhniki = Electrical Engineering News, (76), 22–25 (in Russian).

4. Perelygin L. M. (1971) Wood Science. Moscow, Lesnaya promyshlennost' Publ. 82 (in Russian).

5. Biryukov N.P. (2003) Supports for Overhead Lines of 0,4-10 kV. Operator's Opinion. Novosti elektrotekhniki = Electrical Engineering News, (24), 57–59 (in Russian).

6. Dubina A. A. (2011) New Designs of Polymeric Racks for Poles of Overhead Lines in the Russian Federation and Ukraine. Vozdushnye liniii [Overhead Lines], (3), 27–31 (in Russian).

7. Bocharov Yu. N., Zhuk V. V. (2012) Towards the Problem of Composite Overhead Line Supports. Trudy Kol'skogo nauchnogo tsentra RAN. Energetika [Proceedings of the Kola Science Center of the Russian Academy of Sciences. Power Engineering], (4–1), 78–85 (in Russian)

8. Faibisovich D. L., Karapetyan I. G., Shapiro I. M. (1985) Reference Book for the Design of Electrical Networks. Moscow, ENAS Publ. 303 (in Russian).

9. Gotvyanskii V. V. (2011) Typical Process Charts for the Installation of Free-Bearing Portal Intermediate Supports of PB 330-7H, PB 500-5N and PB 500-7H Type as well as the Modification of the Basic Structure. Vozdushnye liniii [Overhead Lines],(3), 16–18 (in Russian).

10. Kryukov K. P., Novgorodtsev B. P. (1979) Constructions and Mechanical Calculation of Power Lines. Leningrad, Energiya Publ. 312 (in Russian).