Preview

Control of Reliability of Measurements in Power Systems According to the First Increment and on the Basis of Extrapolating Filters

https://doi.org/10.21122/1029-7448-2018-61-5-423-431

Abstract

Reliability of operation of power systems is determined by reliability of the power equipment, and reliability of the measuring information characterizing a condition of power equipment and the technological processes of generation, transfer, distribution and consumption of energy proceeding in it. Unreliable information causes errors in the diagnosis of equipment malfunctions, improper operation of process control systems and reduction the operational technical and economic performance of power systems. Along with the methods of hardware control of the reliability of measurements using digital codes, there are methods of software and logic control based on the technological meaning of the measured data, their logical consistency and consistency. Control of reliability of measurements by limit values is often applied when the result of measurement of a variable is compared with its known upper and lower limits of reliable values. The resolution of the control by limit values is sharply decreased with the expansion of the range of reliable values. The article deals with the reliability control based on the analysis of the rate of alteration of the controlled variables. At control in accordance with the first increments, the first increment, i.e. the difference of results of measurements in the current and previous moments of time is compared with the known range of the first increments of reliable results of measurements. Control in accordance with the first increments is most effective in cases where the controlled processes are sufficiently inertial and the rate of alteration of variables is relatively small. The resolution of the control by the first increment can be enhanced through the use of extrapolation filters. In this case, the current measured value of the variable is compared with its extrapolated value at the previous time and the result of the comparison reveals an incorrect measurement result.

About the Authors

V. A. Anishchenko
Belarusian National Technical University
Belarus

Address for correspondence: Anishchenko Vadim A. – Belаrusian National Technical University, 65/2 Nezavisimosty Ave., 220013, Minsk, Republic of Belarus.  Tel.: +375 17 292-65-52    epp@bntu.by 



T. V. Pisaruk
Belarusian National Technical University
Belarus


References

1. Sharakshane, A. S., Zheleznov I. G., Ivnitskii V. A. (1977) Complex Systems. Moscow, Vysshaya shkola Publ. 248 (in Russian).

2. Mamikonov A. G., Kul'ba V. V., Shelkov A. B. (1986) Reliability, Protection and Reservation of Information in ACS. Moscow, Energoatomizdat Publ. 304 (in Russian).

3. Zinger I.S., Kutsyk B. S. (1974) Ensuring Data Reliability in Automated Production Management Systems. Moscow, Nauka Publ. 298 (in Russian).

4. Itskovich E. L. (1975) Production Control Using Computers. ?oscow, Energiya Publ. 416 (in Russian).

5. Anishchenko V. A. (2000) Reliability of Measurement Information in Power Supply Systems. Minsk, Belarusian State Polytechnic Academy. 128 pp. (in Russian)

6. Birger I. A. (1978) Engineering Diagnostics. Moscow, Mashinostroenie Publ. 240 (in Russian).

7. Gorelik A.L., Skripkin V. A. (1984) Methods of Recognition. Moscow, Vysshaya shkola Publ. 208 pp. (in Russian).

8. Smirnov N. V., Dunin-Barkovskii I. V. (1969) Course in Probability Theory and Mathematical Statistics for Technical Applications. Moscow, Nauka Publ. 512 (in Russian).

9. Anishchenko V. A., Pisaruk T. V. (2017) ?he Effectiveness of Validation Measurements in Automated Systems of the Power Supply Systems Control in Accordance with Limit Values. Izvestiya Vysshikh Uchebnykh Zavedeniii Energeticheskikh Ob’edenenii SNG = Energetika. Proceedings of the CIS Higher Educational Institutions and Power Engineering Associations, 60 (5), 407-416 (in Russian). https://doi.org/10.21122/1029-7448-2017-60-5-407-416

10. Anishchenko V. A. (2003) Monitoring of Measurement Reliability in Power Systems on the basis of Statistical Decision Theory. Izvestiya Vysshikh Uchebnykh Zavedeniii Energeticheskikh Ob’edenenii SNG = Energetika. Proceedings of the CIS Higher Educational Institutions and Power Engineering Associations, (6), 5-15 (in Russian). https://doi.org/10.21122/1029-7448-2003-0-6-5-15

11. Sveshnikov ?. ?. (1968) Applied Methods of Random Function Theory. Moscow, Nauka Publ., 464 (in Russian).

12. Anishchenko V. A. (1990) Monitoring of ????????, ?. ?. Control of reliability of Measurements of Parameters of Power Objects on the Basis of Extrapolating Filters. Izvestiya Vysshikh Uchebnykh Zavedenii. Energetika [Proceedings of CIS Higher Education Institutions. Energetika], (8), 49–52 (in Russian).


Review

For citations:


Anishchenko V.A., Pisaruk T.V. Control of Reliability of Measurements in Power Systems According to the First Increment and on the Basis of Extrapolating Filters. ENERGETIKA. Proceedings of CIS higher education institutions and power engineering associations. 2018;61(5):423-431. (In Russ.) https://doi.org/10.21122/1029-7448-2018-61-5-423-431

Views: 829


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 1029-7448 (Print)
ISSN 2414-0341 (Online)